3.3 KiB
3.3 KiB
| 1 | key | weight | en | sk |
|---|---|---|---|---|
| 2 | switching_profile_point_applied_to_line | INFO | Switching profile point applied to line no. ${line} : ${value} | Aplikovaný bod spínacieho profilu na línií č. ${line} : ${value} |
| 3 | dusk_has_occured | INFO | Dusk has occured | Nastal súmrak |
| 4 | dawn_has_occured | INFO | Dawn has occured | Nastal úsvit |
| 5 | dimming_profile_was_successfully_received_by_node | NOTICE | Dimming profile was successfully received by node no. ${node} | Stmievací profil bol úspešne prijatý nodom č. ${node} |
| 6 | master_node_is_responding_again | NOTICE | Master node is responding again | Master node začal znovu odpovedať |
| 7 | command_was_sent_from_terminal_interface | DEBUG | A command was sent from terminal interface | Z terminálu bol odoslaný príkaz |
| 8 | master_node_is_not_responding | ALERT | Master node is not responding | Master node neodpovedá |
| 9 | configuration_of_dimming_profile_to_node_failed | ALERT | Configuration of dimming profile to node no. ${node} has failed | Konfigurácia stmievacieho profilu pre node č. ${node} zlyhala |
| 10 | circuit_breaker_was_turned_on_line | NOTICE | Circuit breaker was turned on - line no. ${line} | Zapnutie ističa na línii č. ${line} |
| 11 | circuit_breaker_was_turned_off_line | ERROR | Circuit breaker was turned off - line no. ${line} | Vypnutie ističa na línií č. ${line} |
| 12 | dimming_profile_was_processed_for_node | INFO | Dimming profile was processed for node no. ${node} | Stmievací profil bol spracovaný pre node č. ${node} |
| 13 | switching_profile_was_processed_for_line | INFO | Switching profile was processed for line no. ${line} | Spínací profil bol spracovaný pre líniu č. ${line} |
| 14 | thermometer_is_not_responding | WARNING | Thermometer is not responding | Teplomer neodpovedá |
| 15 | thermometer_is_responding_again | NOTICE | Thermometer is responding again | Teplomer znovu odpovedá |
| 16 | thermometer_sends_invalid_data | WARNING | Thermometer sends invalid data | Teplomer posiela neplatné hodnoty |
| 17 | main_switch_has_been_turned_off | CRITICAL | Main switch has been turned off | Hlavný vypínač bol vypnutý |
| 18 | main_switch_has_been_turned_on | NOTICE | Main switch has been turned on | Hlavný vypínač bol zapnutý |
| 19 | power_supply_has_disconnected_input | ALERT | Power supply has disconnected input | Napájací zdroj nemá napätie na vstupe |
| 20 | power_supply_works_correctly | NOTICE | Power supply works correctly | Napájací zdroj pracuje správne |
| 21 | battery_level_is_low | ERROR | Battery level is low | Batéria má nízku úroveň napätia |
| 22 | battery_level_is_ok | NOTICE | Battery level is OK | Batéria má správnu úroveň napätia |
| 23 | door_has_been_open | NOTICE | Door has been open | Dvere boli otvorené |
| 24 | door_has_been_closed | NOTICE | Door has been closed | Dvere boli zatvorené |
| 25 | door_has_been_open_without_permision_alarm_is_on | WARNING | Door has been open without permision - alarm is on | Dvere boli otvorené bez povolania - zapnutá siréna |
| 26 | state_of_contactor_for_line | INFO | State of contactor for line no. ${line} is ${value} | Stav stýkača pre líniu č. ${line} je ${value} |
| 27 | local_database_is_corrupted | CRITICAL | ||
| 28 | electrometer_is_not_responding | ERROR | Electrometer is not responding | Elektromer neodpovedá |
| 29 | no_voltage_detected_on_phase | CRITICAL | No voltage detected on phase no. ${phase} | Na fáze č. ${phase} nie je napätie |
| 30 | electrometer_is_responding_again | NOTICE | Electrometer is responding again | Elektromer znovu odpovedá |
| 31 | voltaga_on_phase_has_been_restored | NOTICE | Voltaga on phase no. ${phase} has been restored | Napätie na fáze č. ${phase} bolo obnovené |